• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recommendation, good distributor wrench for small block?

idrivemopar

Well-Known Member
Local time
5:04 AM
Joined
Apr 30, 2012
Messages
3,698
Reaction score
2,706
Location
Colorado
So, I am finally tired of struggling with loosening and tightening my distributor with a 1/2 inch boxend/open end wrench because its a pain in the *** to get to and I have to switch end frequently to get it done. Can someone recommend a good distributor wrench that actually works with good leverage and reach?

Thanks!
 
KD tools I think. Looks like a big "c".
 
That's the one 1/2 a turn at a time. Easiest thing ever.
 
I have an older Craftsman that is long and has a goose neck end. Works great, might find a used one for cheap on EBay.
 
I made my own by clamping a long handle wrench in vise and heating neck with a torch and bending it. Kinda Poorman way to go but it worked.
 
Auto Transport Service
Back
Top