• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Remote starter switch

71newp

Well-Known Member
Local time
8:49 AM
Joined
May 6, 2014
Messages
146
Reaction score
64
Location
USA
Hi,
How do I hook up a remote starter switch to a 1976 Cordoba, 360 factory ignition system? Thank you, Tim
 
2 terminals on the starter relay on the firewall. The crude way is jump it with a screwdriver.
 
2 terminals on the starter relay on the firewall. The crude way is jump it with a screwdriver.
My starter relay has 4 "terminals." 2 on the bottom, one in the middle and a bolt at the top. The directions indicate that for Mopars some terminals are disconnected and others are hooked up to? Sorry for the newbie question.
 
Hit the bolt & the next terminal in the middle below it at an angle. If you're lazy like me, a screwdriver works.
 
Auto Transport Service
Back
Top