Outlaw525
Well-Known Member
Contact seller
I intended to use this in my Road Runner but sometimes life gets in the way of your plans, so here it is. This is a new Richmond 6 speed with 18 spline Hemi input shaft, part number 7031618AA.
The gear ratios are:
3.28, 2.13, 1.57, 1.23, 1.00, .76.
It has been sitting around for a while but has never been run. It comes with the complete Long shifter and a Coleman hydraulic throwout bearing. A standard Hurst shifter handle will bolt up to the Long shifter.
It will work with a stock bell housing, the left lower mount bolt hole will need to be redrilled and tapped.
$2200 for everything plus shipping. I will pallet or crate it for shipping. I would recommend using Fastenal, I can drop at their location in Bend, Oregon. PM if you have questions or are interested. Thanks
The gear ratios are:
3.28, 2.13, 1.57, 1.23, 1.00, .76.
It has been sitting around for a while but has never been run. It comes with the complete Long shifter and a Coleman hydraulic throwout bearing. A standard Hurst shifter handle will bolt up to the Long shifter.
It will work with a stock bell housing, the left lower mount bolt hole will need to be redrilled and tapped.
$2200 for everything plus shipping. I will pallet or crate it for shipping. I would recommend using Fastenal, I can drop at their location in Bend, Oregon. PM if you have questions or are interested. Thanks
Last edited: