WTB Small Block pre '70 AC Drive Pulley

[JimKueneman]

Looking for the crank pulley for a small block AC car. They are a bit special as they have dampers built into them. There were 2 part numbers and I am not sure what the difference is as they are both 3 groove (diameter?)...

2536752 is the part number for AC and no PS

2402730 is the part number for AC and PS

I don't have a photo of that one but the one on my Coronet looks similar to this one.

I would be interested in either.

Thanks,
Jim

 

[Dodge33]

Hey Jim, I know we have a 3 groove on a 318 engine ( 67 year w/ cast
iron water pump, but its for power steering. Also thinking.... we may have
one also from a 66 Belvedere 273 A/C car that is at another building.. but
I need to go look at it, because we can't remember if this car was a manual
steer or p/steering. Will get a chance to look in 1-2 days.

 

[JimKueneman]

Hey Jim, I know we have a 3 groove on a 318 engine ( 67 year w/ cast
iron water pump, but its for power steering. Also thinking.... we may have
one also from a 66 Belvedere 273 A/C car that is at another building.. but
I need to go look at it, because we can't remember if this car was a manual
steer or p/steering. Will get a chance to look in 1-2 days.

odds lean in the direction she will want PS on the car once she drives it a bit.