Red63440
Well-Known Member
I’m replacing the seals on an 8 3/4” rear end I bought and I received two foam seals, 2 axle seals and 2 stamped metal seals that go between the flange and backing plates. The metal seals were not on the housing or backing plates when I brought it home.
My question is, the metal seal has a raised rib like a shim head gasket, does the raised rib go towards the backing plate or towards the flange?
My question is, the metal seal has a raised rib like a shim head gasket, does the raised rib go towards the backing plate or towards the flange?