• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Tunnel mods for NAG1

dickdale

Well-Known Member
Local time
1:46 AM
Joined
Oct 29, 2010
Messages
456
Reaction score
116
Location
Europe
Who can tell me how much higher the tunnel must be to fit a NAG1 behind a 2013 6.4/392 in a 70's Plymouth Satellite?

Does the tunnel have to be wider?
 
I only had to put two blisters on the tunnel, for the dipstick and shifter-cable attachment point.
 
I'll have to look them up. Try the-body forum[my thread]......may not apply to your b-body.
 
I cut my tunnel out . . .

221079-6c3884c83f71fd33f9a23f7432da46b0.jpg


Got a tunnel from a 2014 Challenger . . . and welded it into my car . . .

241958-c88c1af2d48150a3aa1bd3a000717f03.jpg


Mine is for a 6 speed - but a tunnel hump from a new car with the NAG-1 in it would get you the same result . . .

242147-1369d03d01da816a0f641d4900a14891.jpg


And while I was at it . . . I built a driveshaft loop into the setup . . .

234456-f0a97af44bea1ece70a8290c35e7efbd.jpg
 
very cool! In retrospect I could have done that and saved myself a bunch of time and welding.
 
Saturday I've been to a junkyard and cutted out a tunnel from a Chrysler 300C from 2007. I'm going to see if this is usable.
 
Auto Transport Service
Back
Top