turn signal bulb replacement

[jcskokos]

67 coronet with the hood mounted turn signal indicators. Right now one works fine, other is dead. Swapped housings and confirmed that the bulb is dead. I can't for the life of me figure out how to get the bulb out without damaging the lens or the housing.

 

[jcskokos]

Well nevermind. Its just a little 330 bulb and slides in. Well, its supposed to anyway.. this one was all crispy and didn't want to come out

 

[Nacho-RT74]

Search the bulb on bulb shops... if you search on resto shop will find the price x20. As far I know the 330 bulb is not easy to come by on part shops.

 

[Nacho-RT74]

https://www.bulbtown.com/330_Miniature_Bulb_Midget_Flange_Base_p/bt330.htm

Against

https://www.ebay.com/itm/2-New-GE-330-Miniature-Lamp-Bulb-1-0w-Single-Contact-14-volt-14v/123154430626?_trkparms=ispr=1&hash=item1cac937aa2:g:x8sAAOxyFjNSOhjH&enc=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&checksum=123154430626726b5561a9054b689f8fe6c80edefc6d

 

[440+6]

Midget 330, I put led version in my hood signals.

 

[Ernie ingling]

1893 is for 67 dodge

 

[Ernie ingling]

NAPA has them

 

[Rusty 72]

I had some crusty fender bulbs too and I'm just gonna swap in LEDs like 440 suggested.

 

[jcskokos]

I ended up ordering and installing some led bulbs in them. They work really bright, now my only problem is getting the ground right on the driver's side one

 

[Rusty 72]

The ground should be through the socket. If that's in bad shape you'll have to run a separate ground.