Universal X pipe kit fitment?

[7TBee]

I’m looking to replace my current exhaust system with a universal X pipe kit. Has anyone used one of these? How does it fit with placement of the X pipe?

Also, anyone here have 3” exhaust exiting out at the bumper with a ladder bar rear suspension? Looks like it would be a very tight fit.

 

[RemCharger]

Just don't install the X 90 degrees out

I've seen it done..

 

[496 polara]

Universal is just that,universal.May have to shorten it or make other "adjustments" for it to line up.

 

[Cojohnso1]

Is there anything that's "Universal" when dealing with exhaust? Lol

 

[#41]

I have used the 3" Summit X-pipe on a 72 Charger galvanized, not stainless. How does it fit? Depends on what you are trying to mate it to. Impossible to answer..... but I used it as the basis to build a 3" system from header flange to the rear bumper and was successful.

 

[493 Mike]

I built my own with 180* bends and straight pipe-3". I have shown this, many times on our site but, here it is again.
Mike

 

[7TBee]

Thanks! I’m planning to mount the kit up to Hooker long tubes. I’m trying to avoid welding a bunch of small pieces together.

 

[493 Mike]

Thanks! I’m planning to mount the kit up to Hooker long tubes. I’m trying to avoid welding a bunch of small pieces together.

I wanted all mandrel bends.
Mike

 

[BSB67]

I built my own with 180* bends and straight pipe-3". I have shown this, many times on our site but, here it is again.
Mike
View attachment 2023933View attachment 2023934View attachment 2023935View attachment 2023936

You keep posting it, and I’ll continue to enjoy looking at it.

 

[493 Mike]

You keep posting it, and I’ll continue to enjoy looking at it.

Thanks!
Mike

 

[33 IMP]

Is there anything that's "Universal" when dealing with exhaust? Lol

Yep. The fact that it fits nothing properly...... is universal.LOL.

 

[33 IMP]

I built my own with 180* bends and straight pipe-3". I have shown this, many times on our site but, here it is again.
Mike
View attachment 2023933View attachment 2023934View attachment 2023935View attachment 2023936

That is easily the most beautiful exhaust I have ever seen!

 

[33 IMP]

I built my own 3 1/2" system to the back bumper, using straight tubing and mandrel bends, and giant flowmasters...... works good.
But it looks like a pile of dog poo compared to Mike's!

And as for back bumper with ladder bars...... I don't even try, tho I've seen it done here. I just don't remember whose.
My ladder car got dumped in front of the nine inch, my four link car exits to the side, in front of the rear tires. But both my cars are tiny foreign cars. Probably can be done on a b-body.

 

[493 Mike]

I built my own 3 1/2" system to the back bumper, using straight tubing and mandrel bends, and giant flowmasters...... works good.
But it looks like a pile of dog poo compared to Mike's!

And as for back bumper with ladder bars...... I don't even try, tho I've seen it done here. I just don't remember whose.
My ladder car got dumped in front of the nine inch, my four link car exits to the side, in front of the rear tires. But both my cars are tiny foreign cars. Probably can be done on a b-body.

Stop it-my head is swelling!
Mike