TetanusShot
Well-Known Member
Looking for a used set of pushrods in stock length or very close. For a solid flat tappet 426 Hemi. An old factory set is perfectly fine, maybe even preferred. I have standard size lifter cups and lash adjusters.
Some corrosion or 'chatter' marks on the sides don't scare me either as long as the pushrod cups aren't cracked/broken. I might even take a set that have been overheated/burned on the ends if the price is cheap enough.
The Hemi they are for is so cobbled together and questionable that I'd prefer to not buy new ones to get it running.
I can do Paypal or a Check through the mail or Cash in person if you prefer.
-Thanks, Dan
Some corrosion or 'chatter' marks on the sides don't scare me either as long as the pushrod cups aren't cracked/broken. I might even take a set that have been overheated/burned on the ends if the price is cheap enough.
The Hemi they are for is so cobbled together and questionable that I'd prefer to not buy new ones to get it running.
I can do Paypal or a Check through the mail or Cash in person if you prefer.
-Thanks, Dan