Wheel Studs

[threewood]

Long Front Disc Wheel Studs. These are replacing the ones sold by Cass in his front disc conversion kit. The ones shipped were always too short for steel rims. I found a replacement, Dorman 610-449. (On Left in Pic)

Before

After

 

[threewood]

Rear 11.5" drum, 8 3/4 axle longer studs for steel rims. Dorman 610-446

Before

After

 

[Manzolds]

Hello 3wood,
Looks nice, if street driven without dog dish caps, my only concern running the longer studs would be the exposed thread getting damaged from road debris .

 

[MoparMur]

Thanks threewood, good info that can't be beat. I'm also one of those guys that will search the ends of the earth for someone that makes the thing I need. Case in point: I needed 1/2" longer wheel studs for the front of a customer's 2019 GMC Sierra 1500 due to the need to install 1/4" wheel spacers for the stupid offset wheels installed on the truck. I took all the measurements from the stock studs, went to Dorman's catalogue, and found a Ford-style stud that was just what I needed. Their application chart showed me which models used that stud, called the Ford dealer down the street, and had what I needed the next morning. In virtually all cases someone makes whatever you need. Just have to look for it.