• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Where's the lead (on a 68 coronet HT)

Robking

FBBO Gold Member
FBBO Gold Member
Local time
12:31 PM
Joined
Sep 22, 2013
Messages
143
Reaction score
84
Location
Raleigh, nc
Hey folks, quick question to make sure my research is correct.

Getting ready to take car down to metal using 3M Clean & Strip XT discs. I want to make
sure I understand all the places to avoid and hand sand due to lead filler.

- roof to quarter at sail panel (this ones easy to find with rear window out)
- roof to front post area (haven't popped windshield yet but assume it'll be obvious)
- quarter to rocker panel (at bottom rear corner of the door jamb)

Any other areas to watch out for?

Thanks!
 
A pillar to cowl, bottom of the A pillar
Rocker to quarter panel
Wear a respirator
 
It’s on the top of the cowl near the pillar.

front of quarter at the corner of the quarter and rocker panel. Should be able to see some in the jamb at the corner.

lots of it in the roof pillar. A wide area.
 
Auto Transport Service
Back
Top