• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Wiper linkage bushing

Denis Arseneau

Active Member
Local time
9:30 PM
Joined
Jun 19, 2021
Messages
39
Reaction score
13
Location
Ottawa
Putting the wipers together and I ordered some new bushings for the pivots. They had some cracked plastic bushing on them when I cleaned it up, so assumed that's what I needed. Question is, are they pressed in, do I put it on the pivot firs then the shaft. Pretty tight fit. 1973 Roadrunner.
a20210706_131123.jpg
 
Put them in the arm first, the pivot ball expands them a smidge to keep them in place.
 
Great. Also with a dab of white lithium grease from what I have been seeing.
 
I just used WD40 for assembly and will evaporate. Nylon is self-lubricating, so white lithium isn't really needed.
 
Auto Transport Service
Back
Top