YY1
Well-Known Member
I'd like to put an oil pressure gauge in my 73 Satellite.
I think a small 2" or 1.75" one will fit in the clock area without cutting anything but the blank.
Ideally, it would be real cheap, since it's going to be sacrificed, basically as a mount.
Condition not important, but mountings should be good.
Thanks.
I think a small 2" or 1.75" one will fit in the clock area without cutting anything but the blank.
Ideally, it would be real cheap, since it's going to be sacrificed, basically as a mount.
Condition not important, but mountings should be good.
Thanks.