• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1968 Superbee wipers not working

milit73

FBBO Gold Member
FBBO Gold Member
Local time
11:20 AM
Joined
Jun 28, 2011
Messages
563
Reaction score
361
Location
Vacaville, Ca
I am not sure if the switch is bad or the motor is bad. One day they just stopped working. I have tested the fuse which is good and the ballast has continuity. Not sure that it matters but the gas gauge stopped working around the same time.

Is there a way to test the motor to wiring straight off the battery to test?

Thanks in advance for any assistance.
 
try and extra ground to the motor. Had one on my D100 quite and that fixed it.
 
I am not sure if the switch is bad or the motor is bad. One day they just stopped working. I have tested the fuse which is good and the ballast has continuity. Not sure that it matters but the gas gauge stopped working around the same time.

Is there a way to test the motor to wiring straight off the battery to test?

Thanks in advance for any assistance.
Do you have a wiring diagram?
 
^^^^ this
There is a procedure in the manual to test the motor. Go to my mopar.com and find a free service manual
 
try and extra ground to the motor. Had one on my D100 quite and that fixed it.
Looking at the diagram there was no ground plate on the wiper motor. Added the ground and low speed is working but no high speed. I am fine with the result for now!!
 
Auto Transport Service
Back
Top