1975 up Hood hinge slider blocks?

[Manfred]

Not sure what the correct nomenclature is but they are the 2 blocks with a hole in the center that fit over the ends of the spring steel torsion rods that hold the hood up. One on each end that then slide on a ramp to open and close. Who's got em? Thanks in advance

 

[ChipinAZ]

Not sure if these are the same:

https://www.classicindustries.com/product/all-years/dodge/charger/parts/mn1829.html

I'll have to look at my Charger tomorrow and see if they are the same part or not.

 

[Manfred]

Those look wider than the hood versions, might work in a pinch. Not sure if the diameter is the same either

 

[ChipinAZ]

Monicatti has three different sizes of sliders. Unfortunately, they only have a picture of one of them:

Mopar Trunk Sliders

 

[ChipinAZ]

These are photos of the slider on my '75 Charger Daytona.

 

[Manfred]

Yup those are the ones. My 77 Gran Fury also uses them

 

[Manfred]

The E body "short" sure looks correct.

 

[Manfred]

Thanks very much for the link and measurements, I'll call them and get verification