WTB 62 Plymouth

[FU64RY]

Need a decent wheel lip molding for the rf fender of my 62 Fury.
Dent and dings okay but not smashed flat.

 

[jvaught2]

I dont know if they have one, but they DO have four or five '62s in the yard, so might be worth a call.. was just looking through my photos of the last trip out there unfortunately don't have one with a good enough view of the side on any of them.
John's Salvage in Seguin, TX
http://johnssalvagecompany.net/

 

[KENTON]

Need a decent wheel lip molding for the rf fender of my 62 Fury.
Dent and dings okay but not smashed flat.

I have one that's nice. Will need a light sand and buff. Your PM box said it was full. Send me your email and I will send you pictures. I have lots of 62 parts and trim.

 

[FU64RY]

I have one that's nice. Will need a light sand and buff. Your PM box said it was full. Send me your email and I will send you pictures. I have lots of 62 parts and trim.

I just checked my Pm and it is only 26% full, please try again.
I do not think you can send pictures via Pm unless you are a gold member.
My direct E-mail is [email protected]
Thank you
Steve