Jimclo2002
Well-Known Member
Little background
ALL New brake lines
ALL Rear wheel cylinders
New master cylinder
New power booster
New front calipers
The master cylinder filled to top
Pedal feel, pedal does have resistance but still goes to the floor?
Also, it feels like the brakes are not releasing .
Example when I'm driving applying brakes bring the car to a stop then putting into 1 st gear then when I'm starting to go forward, it feels like the brakes are still holding.like it's taking a lot of power to get the car moving.
I cannot tell if it's the front or the back brakes
Not sure where to start
I'm throwing this out there ,,do you think the power booster rod needs an adapter to shorten the Distance to push on the diaphragm of the Master Cylinder.
Do you think the problems in the rear brakes? As for the grabbing?
How do I improve the low pedal travel to the floor?
Thank you for any help
------------
update 10-17- 2023 I added some photos. I'm trying to do this methodically. photos are my right and rear wheel set up. Everything is new. If there's something that looks wrong please let me know.
It looks OK. I will move it to the proportion valve, and the master cylinder/ brake booster. I'll provide information on that today or tomorrow.
--------------------------
ALL New brake lines
ALL Rear wheel cylinders
New master cylinder
New power booster
New front calipers
The master cylinder filled to top
Pedal feel, pedal does have resistance but still goes to the floor?
Also, it feels like the brakes are not releasing .
Example when I'm driving applying brakes bring the car to a stop then putting into 1 st gear then when I'm starting to go forward, it feels like the brakes are still holding.like it's taking a lot of power to get the car moving.
I cannot tell if it's the front or the back brakes
Not sure where to start
I'm throwing this out there ,,do you think the power booster rod needs an adapter to shorten the Distance to push on the diaphragm of the Master Cylinder.
Do you think the problems in the rear brakes? As for the grabbing?
How do I improve the low pedal travel to the floor?
Thank you for any help
------------
update 10-17- 2023 I added some photos. I'm trying to do this methodically. photos are my right and rear wheel set up. Everything is new. If there's something that looks wrong please let me know.
It looks OK. I will move it to the proportion valve, and the master cylinder/ brake booster. I'll provide information on that today or tomorrow.
--------------------------
Last edited: