- Local time
- 2:07 AM
- Joined
- Jan 14, 2009
- Messages
- 1,937
- Reaction score
- 1,467
- Location
- Shoreline, Washington
Green and red is the horn wire, but should be in cavity 12.
Electrical draw PIA
- Thread starter Tori
- Start date
Tori
Well-Known Member
HA! 'splains why everytime the dang thing touches the back of the fuse block the horn goes 'meep-meep' ;)
So i've got a female spade on that wire and not sure where it came from.
So i've got a female spade on that wire and not sure where it came from.
- Local time
- 2:07 AM
- Joined
- Jan 14, 2009
- Messages
- 1,937
- Reaction score
- 1,467
- Location
- Shoreline, Washington
There are cavities in the top of the fuse box for the horn relay, could go there, cavity #3.
Last edited:
Tori
Well-Known Member
Welp, we can bring this one to a close. All back together and ZERO draw (with clock disconnected) and 13mAH draw with it back in the loop.
Plus I now have a working key buzzer and dome light. That had been on my to-do list and ended up being a byproduct of this repair. While I was at it, I plugged the holes in the firewall, and bled the line for the oil pressure gauge (aftermarket) - those air gaps were keeping me up at night.
Thanks for all the help guys.
Plus I now have a working key buzzer and dome light. That had been on my to-do list and ended up being a byproduct of this repair. While I was at it, I plugged the holes in the firewall, and bled the line for the oil pressure gauge (aftermarket) - those air gaps were keeping me up at night.
Thanks for all the help guys.
Similar threads
