nutz4spd
Well-Known Member
I got the 413 installed and running but man is it having trouble. It's popping through the carb on acceleration (I checked the wiring, timing, etc. It runs an MSD box and factory electronic dizzy) and the oil pressure isn't steady like it used to be. It's also has a very noticeable knock now. Would a bad lifter cause this loud of a knock and popping/rough idle? The motor ran fine before I pulled it out to paint it and such and nothing internally was removed the whole time.
Here's a video I took sitting inside the car.
Here's a video I took sitting inside the car.