Does anyone have any pictures of their rear back seat to trunk bulkhead panel for a 70 or so bbody that you can post here or provide a link to?
Is this one?
Is this one?
Perfect KD! Yes this is exactly what I was looking for!My Jigsaw '70 Charger was slowly getting parted out when I bought it. Many parts were missing but the rear seat was still in place. I pulled it to weld in a new AMD trunk floor. The cardboard divider was still in place when I pulled the rear seat out.
View attachment 1616053
I may use it as a pattern to make something else to replace it.
Thats all I have ever seen. The jute may of been an after market sound deadening option.I don't recall the one in my '69 RR having any jute on it - just the cardboard divider.
FYI- I just bought the cardboard and “jute”. Mine has always been missing
I don't recall the one in my '69 RR having any jute on it - just the cardboard divider.
For the red car, I used spray adhesive to apply Jute to one side, then put additional sound deadener matting on the other side. What started as a 2 lb piece of cardboard is now maybe triple that!Thats all I have ever seen. The jute may of been an after market sound deadening option.
I know when you add weight to those panels they will want to rip on the two mounting slotted areas. I drilled and added two push pins to keep it in place. Those panels are made cheap and might vary between vendors.For the red car, I used spray adhesive to apply Jute to one side, then put additional sound deadener matting on the other side. What started as a 2 lb piece of cardboard is now maybe triple that!