Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
All new rear end bearing in my 9 1/4 b body rearend. . Rear Breaks are overheating. Readjusted several times, new pads. Pad don't look or match the factory photo. Rechecked with NAPA for a different set, Pads are the same as installed.
If I drive it 10-15 miles I can smell the break pads...
Want to purchase complete trim SS vinyl trim package for a 73 Dodge Charger non-SE Coupe. Couple with rear roll-down windows. send PM with photos and pricing. Thanks
Building a 440 for my 74 Charger. Mopar magnum cam with adjustable timing chain. Compression is 10:1. My question is timing chain advance timing verses top center. Asking about the setting timing chain to 2 degrees advance? Thanks
Need to purchase a new big block 917 oil pan for a 74 dodge charger. Vender's sell the early 440 pan. Pan will not clear the newer k-frame. If you have a good source, please advise.
Planning to replace lean burn system on a 75 Cordoba 400. Request a few details regarding the procedure: Install a standard distributor with control ignition module and wiring. Also plan to install a new carburetor. Remove old air cleaner and related wiring. What else? Other requirements??
Parting a very nice 75 Cordoba with rear quarter damage. Perfect black bucket seat interior with console. Has a sun-roof. 91/4 sur-grip rear-end 3.32 gears. 400 k-frame, perfect front end parts, tachometer gauge package. Wire wheel 15" hub caps.
Need a 383 standard bore block. Machine work must not excess .030. I have new .030 pistons. Will take a complete motor if required. Prefer to locate one within 500 miles of Denver CO. Thanks.
Planning to convert a 73 charger to bucket seats with a console. Existing steering column has no key. In the meantime I need parts from another column, but I need advise on how to remove the key cylinder from the donor column Thanks
Can someone direct me to a previous posting: Black with red 73/74 charger. Owner replaced right quarter panel and rear floor pan. Appears someone covered the quarter panel with 2-3 inches of body filler, painted the charger black and sold it to current owner. His posting was originally...
Having difficulty locating a 971 oil pan. 440 and 400 magnum options came with this oil pan. Ordered two from differ sources. Problem with both oil pans would not clear the K frame. If you found a vender with a duplicate or factory style pan, I would appreciate a response.
Unable to locate a set of motor mounts for a 74 dodge charger with a 440. Rubber insert are available but not the complete left or right brackets. Checked the typical Mopar sites, anyone know of a source?
Thanks
selling 71 charger 8.75 rear axial complete with 489 center section. 11 inch drums and 2.76 open center unit. Inside storage for 25 years. Price is $600. Located in Denver CO If you coordinate shipping I will delivery to shipping dock. Can meet within 200 miles for $50 for fuel.
Send PM if...
Selling the 71 charger SE, originally a 383 car with No title. Just a bill of sale
No drive line, just a rolling chassis. Original AC model with disk brakes. 8.25 rear-end. Fender tags provided. VIN WP29L1A_______
Price is $1500 cash, will require $300 to hold for pickup via PayPal.
Rust...
Selling the 71 charger SE, originally a 383 car with No title. Just a bill of sale
No drive line, just a rolling chassis. Original AC model with disk brakes. 8.25 rear-end. Fender tags provided. VIN WP29L1A_______
Price is $2000 cash, will require $300 to hold for pickup via PayPal.
Rust...
Checking with the group to ask if 71 charger with rallye gauges with wiring harness will function in a 73 charger. Plan to replace the horizontal unit the rallye gauges. My concern is the dash wiring harness to the engine bay and tail lights. Do I need the wiring harness from the engine bay...