Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have Bbody mopar parts that came off a 1971 charger
1) 1971 CHARGER Tail lights, there is some damage to the light housings, all light coverings and wiring harnesses are good - $50
2) 6 side view mirrors for b body mopar. All glass is good. One set has some pitting on the housing. - $100 for...
I am hoping someone can give me some info
I have a 71 charger front bench seat that has 2 broken springs under the driver section. I cant find replacement springs. Does anyone have a technique or know of a substitute type of spring?
Dane
Hello
i have a 383 thats keeps overheating. Lets start from the beginning
I had a valve that needed to be lapped. I drained the coolant and removed both heads. Changed the head gaskets and the heads bolts and torqued everything down as per the manual. I also changed out the intake manifold and...
Hello
I am restoring my AC system and the oval fittings that connect to the compressor seem to require an o RIng to fit in an indented space. Can any r134 o ring work or does it need to be a special one?
Thanks
Dane
Help!
Does anyone know where i can get the AC/ Heater pneumatic control block for a 71 charger (i think its the same for all 71-74 b bodies). Pictures are below. I searched online but all i keep pulling up is the model for 67-69. My old one has 2 pneumatic ports that broke off.
If any one has...
Hello
i have a 1971 charger 383 2bbl with a cast crank. The balancer is correct however the torque converter is "neutral" for a forged crank. My question is can i take any weighted torque converter ( for 383, 400 or 440) and install it or do the torque converter weights change depending upon...
2 Questions, please assist if you can help!
I have a 72 full bumper plus hideaway headlight assembly can the hideaway assembly be placed into a 71 bumper?
Same question for the Rear, can a 72 rear bumper light assembly insert be placed into a 71 bumper?
Dane
Hello
i was having issues with my window movement, upon inspection i realized the plastic window roller was cracked. I pulled out the entire window assembly and ordered the rollers. i now have the rollers but it seems the metal posts for the roller is supposed to be pressed into place.can...
Today i was driving my 71 charger ( 383 , 727 torqueflight) and when going up a hill the engine started to overheat and then i couldnt drive further in the selected D gear. I coasted backward until i hit flat land and placed it in park.
So here are the symtoms after towing the car back home
1)...
Hello
In the attached picture you will see the front of my 71 charger sits high. Front the top of the tire to the inner of the wheel well is almost 12 inches. I know the torsion bars can lower the car but i believe you only gain 1 to 2 inches and it throws the entire alignment out of wack. I...
I have a base 71 charger. i took the cluster out because none of the gauges were working. Also the speedometer zero point seems to be stuck at 15mph . Couple of questions
1) Does anyone know how to reset the speedometer to set point 0
2) There are 4 posts on the back of the cluster that i know...
I just had the transmission rebuilt and When placed into drive my 71 charger doesnt move. It takes a significant amount of throttle for it to start to move. I belive the kickdown linkage needs to be adjusted.However i am dollowing the instructions and am not seeing the desired result. Can some...
i have a 1971 charger base with the stock 383 and auto torqueflight. I am looking to convert the front drums to disc brakes but am unsure whats applicable to my needs. I require a brake system for normal road driving and i would prefer this conversion kit be powered or assisted ( i unsure what...
I was wondering if i could get some advice. I want to add a right side mirror to my 71 charger .Has anyone done this before and if so how hard was it. Im worried about making a wrong cut.
Dane
I am in the process of repairing a headlight motor. However , i am thinking it may be worth it to get someone else to do the repair.Anyone know of someone or a place that repairs these motors?
Thanks for the help
I am trying to repair a 72 headlight motor . I pulled everything apart (except for the stator winding because the screws are rusted shut) The rotor can spin .Well i should say it turns when i turn the knob on the bottom of the motor. When testing , the motor drew current . So my two options are...
I am trying to repair a 72 headlight motor . I pulled everything apart (except for the stator winding because the screws are rusted shut) The rotor can spin .Well i should say it turns when i turn the knob on the bottom of the motor. When testing , the motor drew current . So my two options are...