Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Got the AC working on my Polara but does not work when going down the highway. Blows cold at idle. Just did a test with guages and when I rev to 2000 or so the low side jumps over 60, high side stays the same, and compressor kicks off. Kicks back in as soon as throttle drops back down...
NOS MoPar #2485167. This is the Air Conditioning temperature selector vacuum switch
A pic of a new one on ebay shows four ports with one larger than the other. The one in my 63 Polara has three ports with fourth one broken off and a screw stuck in it. I know that two of the lines go to either...
I figured out where the cable end attaches, but am missing the cable clamp that fastens in the area circled in red in this photo. If anyone has this clamp or can tell me what will work I would really appreciate it. Thanks!
I figured out that it has to connect to the ac evap thermo valves, but it looks like cable clip etc are missing?
Does anyone have a pic of how the temperature control cable connects to one of these...
I bought a 63 polara 500 that a previous owner had installed AC into and never got it to work.
Since I am in GA I really need to get this working so that maybe my wife will go to shows with me more often LOL.
Anyhow, compressor never kicks on. Fuse is fine. Since cam does not create much idle...