70 rr restoration help

[Beep!Beep!]

Hi guys I'm starting assembly ,I need some help, pictures of bolts and clips etc to install quarter window it's all in one piece, and the front glass, vent window. I also need a measurement of where the running birds go on front fenders. Any under hood pictures of empty battery tray and engine bay 440-6 before and after engine. If there's a good build documentation on sight a guide to their build would work well. Thanks to all.

 

[BeepBeepRR]

Look up DadsBee one of the most documented and photographed restorations I have ever seen. Different year but most should apply to your 70.

1969 Dodge Super Bee Coupe Restoration

Justin (moparnation74) suggested that I should share my restoration thread here on FBBO. There is just no way that I can find the time to recreate/type/post the past 2 years of work so far, so my only real option to get it started off is to share my thread via link over on DC.com and then update...

www.forbbodiesonly.com

 

[Beep!Beep!]

Look up DadsBee one of the most documented and photographed restorations I have ever seen. Different year but most should apply to your 70.

http://[URL]https://www.forbbodieso...969-dodge-super-bee-coupe-restoration.145777/

[/URL]

Ok great thanks for the info and quick reply, appreciate the knowledge. Makes everything quick to assemble especially when you didn't do the disassembly.

 

[eldubb440]

I have these from a 70 Bee.....should be the same

2 with 1/4 cut away, 2 inside

 

[Beep!Beep!]

I have these from a 70 Bee.....should be the same

2 with 1/4 cut away, 2 inside

View attachment 1509796View attachment 1509797View attachment 1509798View attachment 1509799

Alright! Now that's what I'm talking about.

 

[Geetex]

It's expensive, but this may help you also. Dave Wise is extremely knowledgeable about all things Mopar.
Fastener Manual B Body DODGE | MMC Detroit

 

[Beep!Beep!]

It's expensive, but this may help you also. Dave Wise is extremely knowledgeable about all things Mopar.
Fastener Manual B Body DODGE | MMC Detroit

Ok sounds like a little to much detail for my car, just need major part assembly.

 

[70runner]

Mine's a vert so quarter window stuff will be different. I have a build thread focused on engine bay for my daughter's all original 69 Charger RT (440) at link below. As noted earlier a lot of the engine bay will be similar.

My Daughter's 69 Charger R/T

 

[Beep!Beep!]

Ok thanks so far ,I have a set of wiper transmission arms and the #30191 part that comes through the cowl ,will this work on my 70rr?