6290988
Well-Known Member
I lowered it by the torsion. After lowering it I decided to rebuild the front end and do a disc brake swap.
After alignment and everything settling I noticed that the lower control arm bump stop is a hair or two away from bottoming out. Looks like I'm going have to raise it a couple inches. Sucks because the alignment is spot on.
Any do's or dont's? Still new to torsion bars.
After alignment and everything settling I noticed that the lower control arm bump stop is a hair or two away from bottoming out. Looks like I'm going have to raise it a couple inches. Sucks because the alignment is spot on.
Any do's or dont's? Still new to torsion bars.
Last edited: