• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

340runner's latest activity

  • 3
    340runner replied to the thread What to expect from 1970 383 HP.
    Hell i dont play with the highway, its sucks sitting at around 3.5k at 60mph. I already have in the 4.56s with my 340
  • 3
    340runner replied to the thread What to expect from 1970 383 HP.
    Well in that case a hp 383 with a 484 cam, headers and 440source heads and a performer rpm in front of a 4 speed with 4.56s and slicks...
  • 3
    340runner posted the thread What to expect from 1970 383 HP in Racers Hangout.
    Well, despite all better judgements in me for building a small block stroker or a 440 I snapped on a complete aside from carb 1970 383...
  • 3
    340runner replied to the thread Help with 340 build - chicagoland area.
    Well, i ended up getting a complete 1970 383 hp from a roadrunner. Supposedly running when pulled, and it does still have oil. I'll go...
  • 3
    340runner replied to the thread 15 x 10 wheels on a 71 roadrunner, bs needed.
    Yeah, I got 15x10s with 5.5 inch backspace, with 28 x 10.5 - 15 it needed a 1/4 inch spacer, and its a TIGHT fit.
  • 3
    340runner replied to the thread Help with 340 build - chicagoland area.
    Well, im hoping limiting the amount of parts swapped will help me out with the whole questionable parts thing. Im pretty much just...
  • 3
    340runner replied to the thread Help with 340 build - chicagoland area.
    I'm gonna be doing that, going to mo power madness in bleak hopes someone else has pistons used that would work for me, and also seeing...
  • 3
    340runner replied to the thread Shifter issues.
    Well, sounds like I'm in for new shafts, would you say its better to buy the individual shafts, or would it just be worthwhile to get...
  • 3
    340runner replied to the thread Shifter issues.
    Sounds like something not that hard, I hate removing those g clips though, absolute hell under the car for me
  • 3
    340runner replied to the thread Shifter issues.
    Well, I dont think it is. Its done this time and time again, from when I had old shift levers in and the new ones when I first installed...
  • 3
    340runner replied to the thread Shifter issues.
    So, was able to finally get a cam under and record. Holy hell i need loctite on those bolts, that probably contributes a good bit to my...
  • 3
    340runner replied to the thread Help with 340 build - chicagoland area.
    Its a 5 gram difference, with the l2316f being heavier than what I have now. I've done research here and on FABO, and watched videos on...
  • 3
    340runner posted the thread Help with 340 build - chicagoland area in Engine, Trans & Driveline.
    Crosspost from FABO, sorry if not allowed or if you've already read it have a 71 340 that's in need of a rebuild, I'm just unsure and...
  • 3
    340runner replied to the thread Shifter issues.
    Yeah, seems like its coming to pulling the trans. Oh well, hopefully pulling the motor soon for a rebuild if I can get some help from...
  • 3
    340runner replied to the thread Shifter issues.
    No, but the old shifter was also pretty sloppy so not sure sure The lip is when it's moving into 3rd I dont know what to expect when I...
Show older items
Back
Top