• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

340runner's latest activity

  • 3
    340runner replied to the thread Cylinder condition.
    Pistons are out, its a bare block. This is by far a low budget slap it together and see what it does build, I know it will bite me in...
  • 3
    340runner replied to the thread Cylinder condition.
    Machine shop has 3 month wait! :( Might be what I have to do though....
  • 3
    340runner replied to the thread Cylinder condition.
    Will do, I think i damn near killed that one, it started to chatter the walls. Will get a coarse grit and start going at it. Would i be...
  • 3
    340runner reacted to RemCharger's post in the thread Cylinder condition with
    Like
    .
    Get the hone back and keep going lol. A course grit would be nice , 180. Then up to a 320
  • 3
    340runner replied to the thread Cylinder condition.
    Yeah, the 3 honing stone type. Run of the mill tool loaner from orielly, though it was new in box. Whatever, spent no money on the tool...
  • 3
    340runner replied to the thread Cylinder condition.
    Standard bore right now
  • 3
    So, finally got to honing a cylinder on this 440 block to examine condition through all the surface rust. Can't get some of this rust...
    • 1000004099.jpg
    • 20250609_165937.jpg
  • 3
    340runner replied to the thread Tire spin.
    Side topic, if you're starting from stock suspension, would you go with the superstock springs or a full calvert setup? I think for the...
  • 3
    340runner replied to the thread Tire spin.
    By street radials, do you mean the sportsman st, et street s/s, or et street r? Those sportsman sts are basically cooper cobras or bfgs...
  • 3
    340runner replied to the thread Post your 10 second combo's.
    Oops forgot the thread I'm in...
  • 3
    340runner replied to the thread Post your 10 second combo's.
    How is your low end torque on the max wedge versions, do you think its been killed by too big of head, or not?
  • 3
    340runner replied to the thread Post your 10 second combo's.
    What's the comp ratio you are running? Pump gas or race fuel? Sounds like a nice ride, heads and cam really allow that thing to breathe...
  • 3
    Unless you're talking a 4.5 inch stroker, wouldn't you get more cubes with a low deck 400? If you're talking a 4.5 inch stroker, how...
  • 3
    So the two builds are similar, I assume aside from displacement? So a mod done to a 383 on a a body will have the similar results as the...
  • 3
    Well, how do you think about 440s since I just got one haha A couple of things though, unless you had domed pistons or decked block and...
Back
Top