Recent content by 383coronet

69 super bee hood , Spencer iowa pick up only

I was in one in Detroit 1967( Barracudas )We missed 3rd place because we put air cleaner snorkel was on the wrong side.

If this is mainly street car i would get different pistons.You wont loose much power going down 1 point compression.

Vapor lock happens at the pump.If you want to keep carb cooler block off heat riser and or put a insulating spacer under carb.

You can get the factory style filter with 1/4" vapor line on it from rock auto.On my 69 coronet you can change sender w/o dropping tank.

Thanks 440,that's what i will get.

I would say go to the tank like factory did.

Great to hear, thanks.Sure like to see a pic if you have one.

I did some measuring yesterday,clearance between front of rear tire & w/w opening,2" L/R,3/4"R/R.Also did the string thing along both rears projected up to the front tires.String on left side 1 1/2"away from tire,right side -1/4".Then i measured spring hangers.left side 3"(from mounting surface...

Yes, i have 275/15 BFGs on 8.5 wheels now,and have 3" between wheel & spring and 2"from tire & spring, i think 4.5 B/S(i will check again)i also need to check up on inside W/H,Thanks again.

Yes

I will try that, thank you

What about the tire? The tire will rub before the wheel will

I want to tuck em in as much as i can.