451Mopar's latest activity
-
451Mopar replied to the thread 69 Super Bee EFI Conversion Plan.Alot depends on how much voltage the MSD or EFI needs to see to know the key is on. Because the Ballast resistor is fairly low... -
451Mopar replied to the thread 69 Super Bee EFI Conversion Plan.The cost of the Holley drop in fuel pump is expensive because the hydromat pickup sock is expensive. A Spectra Premium CR9CFI (In tank...
-
Maybe this? I made a colored version of this diagram LOOOONG time ago, and was posted and reposted since that on several boards… but...
-
451Mopar replied to the thread Bent Pushrods-Trickflow 240 Heads.Buddy had bent some pushrods. We checked everything and found no problems with interference, but the pushrods were the wrong length...
-
Wrong length of push rods if several bent at the same time, WAG, Also , why didn't the builder know what ratio of rockers he installed ?
-
451Mopar replied to the thread Trick Flow 295 Heads.Thanks. My planet wasn't totally stripped, just a few splines fell out when I removed it. It was the factory 4-pinion version. Caught...
-
451Mopar replied to the thread Trick Flow 295 Heads.Maybe I just had bad luck with my planetary gear. The aluminum splines were cracked and falling out on my slow 11 second 4,200 pound...
-
451Mopar replied to the thread Trick Flow 295 Heads.The aluminum front planetary gear is another part, the splines can strip out with high HP. The heavier the vehicle, the more stress on...
-
451Mopar replied to the thread Best windows trim clips?.I was going to say R/T Specialities: R/T Specialties - Mopar Fasteners, Clips & Hardware but they are out of stock on the 1968 to 1970...
-
451Mopar replied to the thread Trick Flow 295 Heads.I think the 440 Source Engine block is supposed to be for sale in 2026? What do the Trick Flow 295cc heads flow? Found a chart showing...
-
451Mopar replied to the thread 440 source heads.Sounds like you got a good deal!
-
I have used Lectric Limited wires on my 66 Charger 383. Perfect fit, great quality.. Exact Reproduction Spark Plug Wire Sets for Classic...
-
451Mopar replied to the thread 440 source heads.Been awhile since I bought Edelbrock parts, but Have been burned by Holley with their lax quality control. I won't install a Holley carb...
-
I’m sure if I took a pair of heads to 10 machine shops, all of them will say they need worked after the first machine shop worked on them.
-
451Mopar replied to the thread 440 source heads.I have taken every head to the machine shop (Dave Sarno at SCH Racing Heads) to be inspected and have at least one port flowed. The old...