Recent content by 65AzBel

That is a bit much, but recently I haven't seen a Belvedere 2 in this condition go for more than 10.

I forgot to add that this car has been in Arizona since delivery to first owner. It does have some surface rust on the body due to the sun baking the clear coat off, but outside of that it is pretty much rust free.

Here is what it has: 318/904 and drive shaft from 78 Magnum. Has towing cam and 650 Holley. It has a Koss CD/MP3 Player and a DVD player for the back seats. I just replaced: Front Wheel Cylinders Headlight switch Fuel Pump Fuel Filter Brakes Granted it needs a couple of things and has a...

104.00, a wheel barrow, goat and stove.

I was wondering what is the correct wheel and rim size for a B-body. I know that its 5x4.5 but I do not know the offset. This is what I have on it now: http://picasaweb.google.com/alex.doerstling/Belvedere#5267111295713707890 And I've got a set of these off of a 04 Wrangler...

Did you bench bleed it master cylinder?

Here is mine: http://picasaweb.google.com/lh/photo/fSbNd4-L6AbJ3nxtC3C45Q?feat=directlink

thats what gets me. The original cable is still installed, but I have a new one. I have no issue if I have to switch. I just want to make sure of the speedometer gear before I buy it from TCI.

Since my 65 Belvedere is missing one from its LA-904(swapped in later) I was wondering what type (1 or 2) that it uses. I know that I have to use a 29/30 if its a type one or a 32 if type 2.

Since I got an extra 273 that needs work, I started to pull it apart. The reason it was pulled was it was burning 1.5 qts per 100 miles. The heads are good, 1 slightly rusty intake valve. However 3 of 8 cylinders and pistons are rusty. After the engine was pulled it was stored in a...

Build the 383.

Thanks, I just joined.

Whats the address?

Thanks Runner. Actually I compiled a Gripe sheet that covers all that I think needs work. I'd like to get the bugs worked out before I start using it as a daily or long distance cruiser Gripe Sheet: 1. Vacuum Lines (how many are there?) 2. Bushings (Is the polyurethane the way to go?)...

448907[/ATTACH]"]