Recent content by 65coronetAFX

I’ve got a Very nice polished INDY gen 2 Hemi tunnel ram for Dominators Very good shape and is drilled for Nitrous injectors No stripped holes very good shape $850 OBO plus shipping Pm me here if interested Thank you Matt

Yes Max wedge ports

Indy Low Deck single plane intake Manifold for a 4150 Style carb All in good shape no stripped holes , drilled and tapped for Alcohol injection if wanted but are plugged now Never ported or milled $ 450 Or make offer , plus shipping Pm me here , thanks for the ad Matt

Stage 3 , You are absolutely correct about this , my mistake and I did run a spacer on my damper but with a 3/8 motor plate And a thin spacer on my lower pulley My alternator mounts to my motor plate and a electric water pump I changed the ad and thank you for noticing cuz I forgot about that

I have a nice Milodon # 13250 Big block gear drive for sale All gears seem to be in really good shape top gear has the cam thrust button It has made roughly 30 1/4 mile passes and very minimal street driving (maybe 300 miles ) This needs a more offset outward damper or a spacer on a stock...

Edelbrock #75245 2x4 Gen 2 HEMI Efi intake manifold Never been installed or bolted down at all Had it sitting on my project engine then decided to go with a tunnel ram $ 740 from summit I will take $550 plus actual shipping Thanks and Pm me here

Do you have the lid for the manifold and what carbs is it for if you do ? Thank you

I have a very nice Milodon gear drive for a big block Mopar I doubt it has an actual hour of run Time on it , Had it on a blown 440 on alchohol in a sand drag altered but never ran it much Just don’t have a need for it And been on the shelf for years A friend polished the from cover but it could...

No I don’t think I have one but I will look around I might still ? I’ve got to dig around a bit I will let ya know if I do

Hi Parting out a 65 Coronet I have all the side chrome strips for a 65 dodge coronet 440 I would like to sell All of them are in really decent shape Will sell all at once and the clips and nuts included $450 plus actual shipping You probably won’t find nicer driver quality Look a photos...

Really a sad day to see Sac raceway go , first track I ever raced on when I was a kid in 1984 , and the first bracket race I ever won was there too , when I read the news it was emotional. I feel very lucky to live in idaho and have for many many years and race at Firebird raceway . We have a...

I’m putting a Gforce g 101 in as we speak I’ll keep ya posted I used to run a Dr4 Jericho in my 65 dodge coronet and it worked well

Ok then I have ran it at both 80ft elevation at Sacramento raceway 10.30 @129.88 mph 91 octane gasoline And at 3000ft elevation at firebird raceway and on the streets here in Boise Idaho 10.57@ 127.44 mph with both a automatic transmission and a manual 4 speed Jerico as well neither place had...

Correct on the aluminum heads and the cam is on a 108 lsa

I’ve personally ran 11.5 compression without any problems with pump gas