'68 Coronet R/T's latest activity
-
'68 Coronet R/T replied to the thread 1968 Plymouth GTX.Got everything cleaned up and polished and then began the reassembly. Put new discs and steels in the clutches, the rings and seals on... -
-
'68 Coronet R/T replied to the thread 1968 Plymouth GTX.Took the pump assembly apart to clean and inspect. The rebuild kit should arrive on December 24th, so I will post more progress...
-
-
'68 Coronet R/T replied to the thread 1968 Plymouth GTX.Scrubbed the casing and tail housing, then spray painted them. Waiting for the rebuild kit to get here so in the mean time, working...
-
-
You could spray it with oven cleaner and / or take a pressure washer to it There are some rattle can spray paints if you're so inclined...
-
'68 Coronet R/T replied to the thread 1968 Plymouth GTX.Great, that will help. Should I try to clean the outside of the aluminum case with something? Scotchbrite pad and a particular...
-
'68 Coronet R/T replied to the thread 1968 Plymouth GTX.Yes, I have the FSM.
-
'68 Coronet R/T replied to the thread 1968 Plymouth GTX.So what was the original color of these transmissions. What I am finding in my searches is black or dark gray but most that I have seen...
-
Yeah, it has a shift kit...
-
-
a 3.8 is fine for a street car
-
'68 Coronet R/T replied to the thread 1968 Plymouth GTX.Okay, I dug into the Service Manual and found it. It has 3.8 stamped on the side.
-
'68 Coronet R/T replied to the thread 1968 Plymouth GTX.Okay, I maybe confused as to what the Kickdown lever is. It seems when I do a search online about 4 different images all claim the...
-
'68 Coronet R/T replied to the thread 1968 Plymouth GTX.Thanks, that helps alot. From center hole to center hole the kickdown lever measure 3.125" I assuming that's how the length is measured?
-
'68 Coronet R/T replied to the thread 1968 Plymouth GTX.I watched a video by CRT Transmission on how to install a shift kit. When it came to enlarging holes on the separator plate, I found...
-
'68 Coronet R/T replied to the thread 1968 Plymouth GTX.Spoke with Ray yesterday. He couldn't offer much help but did think that the colored springs indicate a shift kit has been installed.
