• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by 68_MOPAR_B_BODY

  1. 68_MOPAR_B_BODY

    Collection of Parts for 392 Swap

    Its coming along nicely
  2. 68_MOPAR_B_BODY

    Tremec TKX 5-Speed Conversion

    That makes sense. i have the neutral switch wire from my automatic grounded to the engine for now. i like the idea of the neutral switch being operational. if i can avoid even one accidental key bump with the car in gear that is good insurance.
  3. 68_MOPAR_B_BODY

    Tremec TKX 5-Speed Conversion

    I just finished the install of a used but new to me TKO 5 speed. (I have added the carpet since this photo was taken.) Thank you to all that made this post so informative. i can honestly say that his was by far the best upgrade i have done to this car. The car is way more responsive and...
  4. 68_MOPAR_B_BODY

    TREMEC SHIFTER RELOCATION FOR 68 B BODY

    Yeah i have been looking at the shifters they have. I will likely use the images as inspiration to fab my own
  5. 68_MOPAR_B_BODY

    TREMEC SHIFTER RELOCATION FOR 68 B BODY

    Looks like i have the same Keisler and TKO 5 spd set up that you have ... (minus the Hemi..LOL) have you had good luck with this transmission over the years? have you made any changes to the shifter springs?
  6. 68_MOPAR_B_BODY

    TREMEC SHIFTER RELOCATION FOR 68 B BODY

    I agree with getting the trans and seats in first. I have tried to search for b body cars with this type of set up. I have not had any luck finding anything.
  7. 68_MOPAR_B_BODY

    TREMEC SHIFTER RELOCATION FOR 68 B BODY

    I am about to start the conversion from 727 to a TKO 5 speed. I bought a complete trans, bellhousing, clutch and all the parts from a 68 coronet that was being converted to a modern Hemi swap. The shifter location out of the floor is quite far forward, i am wondering if anyone in this forum has...
  8. 68_MOPAR_B_BODY

    Pictures of some superbirds

    Old pic from before the car was moved
  9. 68_MOPAR_B_BODY

    Edelbrock E-Street Heads and HP Exhaust Manifolds

    I would say they should fit fine. I have the e street heads on my 383 with headers and the angled plugs provide much more clearance.
  10. 68_MOPAR_B_BODY

    SUPERBIRD PRODUCTION NUMBERS?

    From the research I have found it seems approximately 1850 of the 1935 birds were shipped to dealers in the US I am interested if anyone has any information of how many superbirds were shipped to Canada, and if the list contains which dealers received hemi cars and so on.
  11. 68_MOPAR_B_BODY

    Front turn signal light socket replacement

    I'm interested in finding where I can buy replacement turn signal sockets to install in my front 68 RR housings? I have read these can be replaced with new sockets. does anyone have a part number or a site to buy ones that will fit?
  12. 68_MOPAR_B_BODY

    FOR SALE Lots of Mopar parts for sale. Mostly 68-72 B body

    Do you have any buddy seat brackets? front turn signal housings for 68,69 RR?
Back
Top