Recent content by 69bfan

Thanks to everyone who attended the event, whether it be as a spectator, bringing a car for the show, a racer or selling in the swap meet. For the shows to continue and to grow, it takes everyone including the staff to pull things off. For the swap meet, it was I believe 343 spaces sold which...

Try to find good used ones. Reproductions lack the details and are hard as a rock.

Stop by and see us in the swap meet. Just look for the Dale's Cuda Shop and Restoration Parts and Materials banners.

We have been doing the Carlisle show since 1992 and Columbus since 1987. We have basically been in the same spots all of these years. We have grown significantly over the years and the foot print that we take up is much larger than the four spaces we were using at the shows when we first...

Starting in '68, the 440 High Performance Engines and Hemis were factory equipped with 3/8 inch inlet line with the 1/4 inch return line and the fuel vapor separator. Unless it is an outright modified performance engine, a 5/16 inch fuel line works fine. The factory A990 Hemi race engines...

@Richard Cranium, the trunk mat for the Sport Satellite is factory original to the early production cars. I know of three other early production Plymouth B-Bodies with this style trunk mat. The ones that I know about were all built in mid September to mid October and yours is the earliest one...

16 inch on the convertibles. The bayonet are all the same. The only difference being the blade itself.

The four door cars used a taller windshield so the wiper blades are 16 inches where as the hardtops used the 15 inch blades.

The Moparty show dates are quickly approaching. Preregistration at $95 runs through September 4th, then it will go to $125 for the show field. The swap meet spaces are $75 per spot. For those who will be attending and if you guys would like to have an informal meet up, your more than welcome...

If you guys want to use my location, it is easy enough to spot. It is the large circus style tent just as you enter the swap meet from the drag strip side. Extra chairs, cold water and some shade. but the weather looks good. Good turnout today, Thursday. Hopefully sales will be good...

You will find us in our usual spot in the first two rows of vendors that you come to as you enter the swap meet from the general show field / drag strip. Ted Stephens with his AMD display takes up the top portion of the two rows and we fill out the other half of the two rows with our product...

For any of you who will be attending and looking to purchase reproduction parts, I will be at the show helping out Serge Cote with his setup. He carries a wide variety of our reproduction parts and I will be loading him down with a trailer load of product next weekend at the Mopar Nationals in...

@OneWheelPeel, we typically sell the kits in either a four piece or eight piece kit. Selling just one piece is going to be more costly as we still have to go through the process of manufacturing, invoicing , packing , shipping, etc. If you had purchased a complete kit and damaged a piece, we...

We are downsizing our setup over in row C for this year. I have two spots available, C61 and C62. If your interested in one or both spaces, drop me a message or a call at 404-643-576zero. I will be leaving Sunday night for Carlisle, so I am in the process of loading out for the show., so if...

For the Mopar Market, no matter where you are purchasing the carpet kits from, they are all a ACC product.