Recent content by 69RRMFF

Here’s the frame jig I made. There’s a diagram on the web I built it off of. I built it a bit high so I could get underneath the body for floor panel figment and such. I would recommend you put it on rollers. After the one piece floor and one piece trunk floor and other repairs were accomplished...

Just painted part of mine this afternoon. Here you go.

WTB High energy 231/237 Comp. Cam for Big Block 383. The world seems to be out of them and I need one soon.

interested

Ok, I made a template from a donor firewall and used common reference points. I made the template from poster board and cut reliefs slits to form the compound curves by the transmission hump. It took many adjustments and tweaking to get it right. My vinyl template idea was not good, too...

Found

Found

Ok, I’ve made a template for locating the holes for installing a factory air conditioning system in a non-ac car. I found an ac firewall and made the template from the backside of the firewall. This is not to be confused with an after market system. There are some common reference points so it...

I’m going to take some dimensions / make a template this weekend if it works out. I tried taking measurements on a car with the a/c unit installed and I wasn’t comfortable hacking into my firewall with those dimensions. The car I’m looking at this weekend is an a/c car with no a/c unit installed...

69 Dodge Super Bee tail finish panel. $250 plus ride.

69 Roadrunner lower grill panel. Very straight. $140 plus ride.

WTB front and rear side marker housings and reflectors for 69 RR / B body.

Looking for buddy seat brackets 69 RR.

I think either side would work.

No message came across.