Recent content by 73satwagon

set of front and rear doors, good condition. Rear window (back glass) misc. 4 door trim just parted one out, no 1/4 panels or bumpers these parts are FREE TO A GOOD LOVING HOME. in ATLANTA area

I'll confirm that on the 383 2v b body I have one and YUP it's a 2.76 open gear.... all the best my friends

ok that is an excellent brake I'd put DOT 5 fluid in there never rust God Bless

Pm me if you still need them. This is for the fixed caliper Bendix 4 piston unit. Each caliper uses 3 tie bolts, two drilled one not is this correct?

sometimes the code is the last three digits (or two) of the PARTS number. So if you have a PARTS catalog for the year, look up in there and it may have a ratio.

I have a 73 Plymouth wagon don't regret buying it. But use it for what it is for, carrying stuff. Don't try to make it fast, although with a 383 it aint no slouch, If you want to go REALLY fast get an A body TOO, but the waqons are good for parts chasing, going to shows and you just don't see...

Need wagon taillight lenses 73 up, I think they are same Dodge and Plymouth, bezels may be different. I know the 71 and 72 are smaller. not sure of number what you got?

I'll take it I'm in Georgia 30506 can I send a postal money order? If so I'll have it in the mail tonight. Let me know I'll be away from the computer in one hour thanks Jim

Hello looking for some radiators 67 383-4 2785936 and 67 six/manual 2785967, but I'll take 2785968 or2785969 if you have any thanks God bless Jimin Georgia

2785969 radiator for 67 slant six manual trans non AC thanks I'm near Atlanta Jim

Hats off to using the original. It is ezer to put on a new one, but to restore, that is outstanding, good job.

thanks that helps a bunch, one more question, are the quarter extensions the same between 66 and 67?

Are the lenses the same between 66 and 67? In 67 are they the same between Belvedere and Sat/GTX? I know bezels are different. Thanks Guys

My understanding is that is was a strip installed under the tag BEFORE paint that the Inspectors would punch there mark onto AND THEN cut it off for record keeping reasons. the strip started out very long (maybe 10 inches) and would be cut down to almost nothing by the time it got to the end of...

they sometimes did a sloppy job, they did dozens of cars a day, I lay on the floor and spray up, don't be too neat if you want a restored look