Recent content by abloch

More on request

More pictures.

*Clear title in my name* Car is located in Seattle, Washington. This is a complete rolling project that I was in the midst of prepping for paint. The only rust spots I found were in the heater box, a little in the driver cowl and a few floor patches (see picts). Frame connectors were welded in...

Here's wiring. Wiring – MyMopar Check your grounds and power to and from the column.

This has been sitting around the shop WAY too long. Thought I was going to need it. I do not. Hughes part #19-30. 19 Spline/3000 Stall (est.) Located in Seattle for pick up. Shipping available at buyers expense. $600 OBO (Saw them retailing for 700)?

Mine had the foam/weatherstripping along the edge of the splash shield. I sourced weatherstripping from the local hardware store and you are correct. It allows you to get the shield nice and snug without rubbing or squeaking. Get something around 3/4 of an inch think. Did you get the sponge foam...

Spare Parts for the win!! Thanks I got my interior all sorted out. Found NOS replacement covers out of Australia of all places. rustytoolss if you decide to go with the original fabric I have enough to do your seats. I bought it years ago from SMS and ended up going a different direction with...

One of my best investments.

Hey Spare Parts, flip all those tabs over to Fury Wagon 123 and snap a picture for rustytoolss. Thanks!

Took a coffee break.

I know you're out there. Would you be so kind as to shed some light on this tag?

My all time favorite!

Popping the glass out is quite easy on these. Take your time undoing the locking strip and they'll pop right out. I recommend that you avoid using anything metal for prying the strip apart and have an assistant when it comes time to remove. Once the locking strip is released apply a liberal...