AR67GTX's latest activity
-
AR67GTX replied to the thread Noisy speedometer cable.I’m afraid once it’s started making racket, that’s an indication the inner sheathing is probably worn through. New cables aren’t that much. -
AR67GTX replied to the thread Higher quality input shaft seal A833.Playing around with the old seal after removal, it seems to be a very snug fit on the shaft - not seemingly worn oversize at all...
-
AR67GTX replied to the thread Enrichen transition circuit.Maybe my sense of carb operation is out of wack but I can’t see running on the transition circuit at 60 mph? If that is true however...
-
-
AR67GTX replied to the thread Battery terminal corrosion.I’ve found that a shot of WD40 usually cleans up the battery leakage and corrosion on AA and AAA battery lights, radios, instruments...
-
AR67GTX replied to the thread Who Likes Aircraft ?.Many years ago I owned a Turbo Saab up in KS. At the annual safety inspection the mechanic came back after a while and said to me - I...
-
Did they mount those engines backwards too?
-
AR67GTX replied to the thread Battery terminal corrosion.It seems I read something a few years ago that corrosion buildup on a battery terminal tells you something about your charging system...
-
AR67GTX replied to the thread Classic Industries Dash Harness.They may have changed suppliers, but the wiring harnesses I bought from Classic about 4 years ago were all M&H.
-
AR67GTX replied to the thread Battery tray, Hemi.I believe so (red),at least for the bigger battery for 426 and 440 cars. I used red.
-
AR67GTX replied to the thread Bought a new M&H under dash wiring harness for my 67 Charger- Installation tips?.The kick panel on the driver said anyway needs to come out as there are a couple plug connections behind it. I replaced my bulkhead box...
-
AR67GTX replied to the thread Higher quality input shaft seal A833.Yes, I’ll check the pilot bushing. Actually the input shaft/front bearing is a lot tighter than what I’m used to and the tip looks...
-
AR67GTX replied to the thread Higher quality input shaft seal A833.I notice Rockauto lists this seal for the A745 and A903 but no mention of the A833. Is it safe to assume they all use the same seal?
-
AR67GTX replied to the thread Higher quality input shaft seal A833.Yeah, that looks promising. I polished it with some 800 yesterday and it looked much better. I’ll try slicking it up with some 1000...
-
AR67GTX replied to the thread pinion angle.Have you measured your transmission, driveshaft and differential angles to see how the 2 u-joint angles compare? I would do that before...
-
AR67GTX replied to the thread Who Likes Aircraft ?.That would have been something to experience.
