Aron Gleason's latest activity
-
Aron Gleason replied to the thread vertigate.Put it on the price is right lol -
Aron Gleason replied to the thread 440 build.Is a hydraulic roller cam good? Or would a solid roller cam be better? What about a solid mechanical cam? Im leaning towards a roller...
-
Aron Gleason replied to the thread 440 build.What rocker arms would be a good choice? Hughes engines rockers that have been cryogenic treated or harland sharp rockers? What about...
-
Aron Gleason replied to the thread 440 build.Yes. But it's not something I'll get built by next year. It'll probably take 2 years for me to gather up everything i need.
-
Aron Gleason replied to the thread 440 build.With aluminum heads, 11.5 compression and correct timing should be doable with pump gas.
-
Im going to start buying parts for a new motor. Looking at the trick flow 270 heads with around 11.5 compression and a 690 lift roller...
-
Aron Gleason replied to the thread Stall speed.What i was told, is to have the car in 3rd gear at about 5 mph then stab the throttle and where the tach stops is what stall you have.
-
Aron Gleason replied to the thread Best Hydraulic Lifters Suggestions.Ive read where Johnson lifters are about the best. Hughes engines sells them
-
Without a doubt
-
Aron Gleason replied to the thread Petcock leaking.Yeah, I guess it happens to everyone once in a while.
-
Aron Gleason replied to the thread Petcock leaking.Well wouldn't you know it, I was turning the wingnut the wrong way thinking I was closing it, when I was actually opening it.
-
Aron Gleason replied to the thread Petcock leaking.Hmmm. Interesting, I didn't think of that
-
Aron Gleason replied to the thread Petcock leaking.I'll do that
-
If the rad is empty, I suggest pull the petcock and check to see the closed position of the valve. You might be able to see if it is...
-
Aron Gleason replied to the thread Petcock leaking.It leaks out as fast as I put water in