• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by Ashy22

  1. Ashy22

    machine screw size

    i have ordered some 8-32 x 3/8" to see if they will be ok. Thanks anyway
  2. Ashy22

    machine screw size

    Thanks Richard. I will get some of each size. It's only 3/8" long (thread) I took the remaining one out and took photos attached .
  3. Ashy22

    machine screw size

    Anybody know the size of the machined Philips screws that hold the wiper switch in the dash of a 69 roadrunner. I lost one taking it out. It fell into the dash but searched high and low and no luck. Thanks ashy22
  4. Ashy22

    15 x 8" Magnum 500's

    and some more.............
  5. Ashy22

    15 x 8" Magnum 500's

    Well this is what I went for in the end. Cragar/Unique 177 Supreme Chrome 15 x 8 on the rear and 15 x 7 on the front. Tires are 255/60R15 on the rear and 215/70R15 on the front. See picture
  6. Ashy22

    Anybody used or seen Cragar/Pacer Supreme wheels on a Roadrunner?

    Anybody used or seen Cragar/Pacer Supreme wheels on a Roadrunner? I saw them on a Mustang at a show and they looked cool. (picture below) The guy had them on for 10 years!
  7. Ashy22

    Can I use this?

    http://www.mytyres.co.uk/cgi-bin/rshop.pl?dsco=110&cart_id=44144414.110.31731&Cookie=froogle&&ranzahl=4&Breite=275&rsmFahrzeugart=ALL&Quer=60&Felge=15&Speed=&tyre_for=&m_s=&search_tool=&suchen=Ordern General grabber HP are a good price too.
  8. Ashy22

    Can I use this?

    What do you mean by "hook"? - - - Updated - - - I sure will. - - - Updated - - - I don't think so. Can't say I have heard of them.
  9. Ashy22

    Can I use this?

    Over here in the UK, tires are mega expensive especially BFG's. So..........Could I use these on a 69 Roadrunner or wouldn't they look right? http://www.mytyres.co.uk/cgi-bin/rshop.pl?dsco=110&typ=R-148693&partner=1&ID=froogle
  10. Ashy22

    15 x 8" Magnum 500's

    thanks silversedan. Those wheels on your bird look cool. Just what i want really. - - - Updated - - - Thanks djais1801 Yes my drivers side lug nuts are left hand thread as they are original stock hubs. Those wheels sure fill the arches out well :) This is mine at a show in the UK last summer.
  11. Ashy22

    15 x 8" Magnum 500's

    Hi all, After much pondering I am going to get my 69 Roadrunner a new set of Wheels Vintiques magnum 500's. 15 x 7 (4-1/4 BS) up front and 15 x 8 (4-1/2 BS) at the rear. I was thinking of all the usual options, Cragars, Torq Thrust 2's etc but the bird is a totally stock matching number 383 so...
  12. Ashy22

    annoying click/clunk behind dash

    My Roadrunner does it in the "Accessories" key position which is turned to the left AND in the position turned to the right, one step before you engage the starter motor. I think it may be something to do with the 2 speed wiper motor switch. I am still investigating and will post some more info...
  13. Ashy22

    annoying click/clunk behind dash

    same here.............. I have noticed that after a few erratic clicks where the ammeter goes left there is sometimes a noise like a "ping". Everything is then OK for about 5 seconds and the whole thing starts over again......... a few clicks and then a ping noise............weird!!!
  14. Ashy22

    annoying click/clunk behind dash

    Hi guys. I have a similar problem. I have just taken possession of a 1969 Roadrunner. It's in a really very good condition but it has a few minor problems. Number one is flickering lights when either the ignition key is in the "test accessory position " turned to the left or in the first...
Back
Top