Recent content by Badbelvedere

I appreciate the input I haven't done anything yet it has been so hot here its ridiculous to weld and grind lol but I will def keep you all updated

LOL I will would hope that you found out before you drove it. but I have a 1250 dominator 5200- 5800 stall and it flashes at 4800 .636" solid roller lunati cam and it has eddie rpm heads flowing 301

Hmm thanks for that Mike I mean it makes sense to have the air funnel in like it is doing plus I have always heard that the higher the carb is off the motor the more torque you will make which is made from hp lol

I appreciate the input again guys, let me just say that I moved my rear end back but I did not move the top shock mounting bracket back so the shocks have a little bit of an angle not much so that would probably cause the shocks to hit as well. My angle on my pinion is more than 10 I can tell...

I really appreciate all the input for this post I believe I am probably not going to do anything to its just working so good hate to mess that up lol

Thanks I really appreciate the compliments, I believe my weight distribution is helping me out alot though it has 49.6% on the rear tires and everyone should know distribution is key to hooking. That and a good concrete pad lol, I love using the ss springs just to prove that they work still I...

- - - Updated - - - Not sure how well you all can see the rear end under the car in the picture. But it is def more of a bottom end car especially with the 440 stroked out to a 499 and the fastest I have been is a 9.90 at 132mph. That is foot braking by the way. I have been praying over my leaf...

Thanks for the input I heard of adding clamps on the front as you can see I never really had to yet anyway lol But I have a 67 belvedere and they have problems with the width of the tire so I need some roll out. Plus it centers the tire in the wheel well. The snubber in theory seems like it will...

As of right now I do not have a pinion snubber that works that is because I moved my rear end back 1 7/8" to make room for tire height. I am pulling 1.33 60ft with ss leaf springs, I have an adjustable snubber but it is not hitting the floor pan so before I went through all that work of welding...

Thanks for the response I have the strange s-60 and I must say that is one of my favorites as well. My car weighs 3456 with me in it and it runs 9.90s foot braking the car picking the front tires up about a foot and carrying them about 50ft. 1.33 60 ft with ss leaf springs no clamps and 25...

no luck huh

Jw has anyone on here used a trans brake with super stock leafs springs

Thats my buddy, its my car