Bird 426's latest activity
-
Bird 426 replied to the thread 69 Coronet R/T fire.I'm almost 76, wiring is easy, plug and play. Pull the front seats and steering column if you replace the dash harness. Just finished... -
Bird 426 replied to the thread Steering pump leak cause.The reservoir can must be close to perfect for the o-ring to seal.
-
Bird 426 replied to the thread Minii starter disaster job..The starters alignment is the snout into the bellhousing. That top hole, too large, larger than the bottom bolt hole, is just there...
-
Very interesting…..i need to come up with something like that…. This is my pump on a different car
-
Bird 426 replied to the thread Fan belts squealing - can’t seem to solve.Two things, is that a cogged belt? Second, if a belt bottoms out in a pulley groove, it will never stop squealing. A/C belts were...
-
Bird 426 replied to the thread six pack tuning help in NJ.I would go with the tall yellow springs in the outboards. To adjust them properly, should have Promax base throttle plates in the...
-
Bird 426 replied to the thread six pack tuning help in NJ.Can you tell us what you have? Stock carbs or Promax modified? Are you able to take them apart yourself? I just went through this...
-
Bird 426 replied to the thread Thosaf extractor set junk.I am not much of a fan of extractors.
-
Bird 426 replied to the thread Pro-pinions requested!.What would actually look better all around would be the housing that has 2 sender locations.
-
-
Bird 426 replied to the thread FITECH 6 PACK.Having built an Experimental aircraft, unless there is a call out, there isn't anything special about aircraft aluminum. For tubing...
-
Bird 426 replied to the thread Questions about front shocks..Why would you want the control arms to rest on the bump stops? Bump stops are for excessive travel, as hitting a pot hole or severe...
-
Bird 426 replied to the thread Pro-pinions requested!.I would leave it black. If someone actually looks at it, they will know that it isn't stock anyway.
-
Bird 426 replied to the thread 68 Charger - Hood Insulation.Seems odd, I replaced the molded pad on my ,'72 Dart " looks just like Mike's " and did not have an issue with the metal clips. It is...
-
Bird 426 replied to the thread Transmission options.The '69 Hemi Road Runner that I am trying to get together had a 4-speed, I even got a scattershield for it. Then decided the hell with...
-
Bird 426 replied to the thread 1970 Road Runner Dash Pad Removal.Yes, you can do it. I did it on my '69 Road Runner. I did have pretty much everything out of the dash though. Steering column...
