Recent content by Breth

I especially ordered a "normal one" instead of the highflow..

No difference with the thermostat

I have to say that were tested without a thermostat, but i can not imagne that puting in the thermostat will do such a big difference....

OK, news: We did put a new reservoir in a higher location in to be absoultley shore there is no air inside. We filled up the water till the water came out of thel bleederscrew id weld in in the radiator. then let the enigne runnin till it sucks a bit water down, refilled the reservoir and put...

Ok guys, some news! I did put a transparent plastic tube between radiator and upper cooler-hose to see what the water is doing while running. After instaling the tube and refill a small amount of coolerfluid back in we started the eingine and it immediately starts building foam..... So now it...

ah ok, thank you.

Or is maybe just the oilpumpdriveshaft not good anymore?

So we did vacuumise the coolingsystem and was filled it up with water. It was 100% air-free. But was still the same on the testrun. It also is wired that if you turn on the fan when hot absoulutley nothing changes on the temperature. When the cart came back in to the shop and i shut off the...

So yesterday we were trying to flush the engineblock with a pressureized watergun. The flow and the ammount of water wich came out was looking ok for me. I did connected the lower hose then back to the radiator and fill up the rad with water. the upper hose was still diconnected from the...

How you mean about the oilpressure about the bearing? Because after the reinstall that it not sit in the excact same place as before?

WIch oilpick up do you mean?

Dyno....

Hi, We have a customers 1968 top of the notch dodge charger. It has all matching numbers but with some modifications. The car got a to 500ci stroked indy head, indy valvetrain engine in it. The engine got a different carb, intake, got headers, 2x 3" exhaust, built trans with different...

Hey, Sry i was in the usa for a the last week on sema. I didnt watchted the forum over there. Now im back in the shop, but we have also some different work to do. So the mainthing about all those ideas is that when the car came in everything was working propper, so i cant belive that now the...

Its a aluminum one