Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi Miller, thankyou for reply, tapers are obvious, my question is can that bar be used either way {as in spinning round so left side goes to right, tapers wouldn't allow just turning it over}as it does fit and may offer different clearance options. Manuals/ google aren't that descriptive
Hi all,
On my 62 Polara can someone tell me which way round the centre drag link should go? looks to me like it can go either way which would give options for oil pan clearance
Thankyou, easy one when you know .
Yes I am still thinking of leaving the beam in, just perhaps need reassurance that it would hold up ok with a big block in there. Appreciate the springs would need poss refurb and better shocks but I would also want to upgrade the brakes, not necessarally to disc just better modern drums , its...
Hi all, I have a project 40s pickup truck I want to fit a 440 into. Right now its got the original beam axle up front, what cheap option front subframe would you guys recommend without cutting off the front rails. IE Volare , whats out there option wise. Also looking for an 8 3/4 rear axle. Want...
Hi all, my '62 Polara is apart now, new floor going in, have a '67 440,4 speed for it plus an upgraded 8 3/4 rear. Can I swap in a later K frame to move the engine back a little? If so which one is best and then what else? I guess the trans mount, again what do people use here. Clutch linkage? I...
Sorry not really B body request but my son with house commitments still dreams of us re commisioning an old truck back from the grave. I can see it being me funding most of the project but thats ok if it gives us some time together on saturdays. So open minded right now, just seeing what you...
Hi all, I have a 440 in my 62 Polara, as we know the engine sits about an inch further forward on the stock K frame . I want a new oil pan and want to know whats 'the one' to go for that gives good clearance but I want to retain a stock look so not really looking for a boxy, racey look. The pan...
If youre thinking of using an AMD floor pan FYI they are out of stock and wont be reproducing anymore for 6 months.I searched all over and found two at Kramers, they now have ONE left so good luck with that