• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by [email protected]

  1. C

    Manual Steering

    Check first! I believe the column shaft is a different size, for manual steering, its longer if I remember. I converted mine from manual to power steering and had to change the shaft. The manual shaft is longer.
  2. C

    1967 Plymouth front signals complete

    Mike , I'm sorry ,I don't know if I responded to your question. $10 to ship. Thanks Charlie
  3. C

    B -Body dash defroster ducts

    B-Body dash defroster ( 2) ducts with (1) hose. $25 Thanks Charlie
  4. C

    Left handed axle studs (10)

    10 left handed axle studs with lug nuts (1 7/8 '' overall ) (thread length 1'' ) ( $20 ) Thanks Charlie
  5. C

    1967 Plymouth front signals complete

    1967 Plymouth (2) front bumper signal light assembly's complete with housings,lens,wiring with factory plug in. $25. Thanks Charlie
  6. C

    B Block valve adjusting set screws

    Big block (16) valve adjusting set screws in OEM bag. $25 Thanks Charlie
  7. C

    MSD Ignition box

    The MSD box is used for 1 season. Thanks
  8. C

    MSD Ignition box

    MSD ignition box (PN 5900) complete with all instructions, rubber mounting inserts and bill of sale from Summit Racing. $100. Thanks Charlie
  9. C

    1966/67 Plymouth dash cluster

    1966 / 67 Plymouth Belverdere / GTX complete dash cluster,with all gauges,head light switch,wiper switch,heater controls, top grounding bracket. Good condition . $150. Thanks Charlie
  10. C

    Assorted Mopar parts

    Sorry ,No I have the gasket that attaches to the body and the plate that bolts to the trunk. Thanks Charlie
  11. C

    Assorted Mopar parts

    66 / 67 B-Body - 440 / 426 motor Manual steering box ($125) / Dash cluster complete ($200) / 2 Speed wiper motor ($50) / Alternator double pulley - date code 67 ($50) / Dual point distributor ($100) / Starter code 375525 / 053059 ($35) / adjustable rocker / push rod studs ($35) Front signal...
  12. C

    67 Plymouth G T X

    First year of GTX,only 11,429 were made, original 60,000 mile car ,6,900 miles, since restoration, All original sheet metal, floor pans, doors, inner fenders rocker panels, etc. Stored in climate controlled garage, everything new,440 cu.in /375 hp,727 auto ,3:55 dana posi,metallic red / black...
  13. C

    MSD Box

    Cut and spilised 12v wire to resister to coil,investigated brown wire from 8v side of resister back into fire wall into ign. switch.It gives 12v to points distributer for initial start from solinoid side to starter. Thanks
  14. C

    MSD Box

    I though so ,but coming out of the resisters 8 volt side wire to distributor is a 2nd brown wire feeding back into the cars main wire harness at fire wall ,to feed something under the dash.Any idea what it serves. Thanks Charlie
  15. C

    MSD Box

    1967 Plymouth GTX 440 cu.in.When installing MSD box along with MSD distributor,should the ballest resister be removed and run 12volts direct to coil? Thanks Charlie
See more
Back
Top