Recent content by charger70

One thing more. From 97, the a518/46re trans do not have a connection for manual speedometer cables. They are all electric speedos. There are a couple workarounds for this tho.

I have a 2002 magnum swapped complete with the EFI and OD trans in a 67 Belvedere. It's a fun swap but... the 02 trans needs the computer and serious work to the torsion bar cross member. Can post some pics if you want. You will need a electric fuel pump too, even if you go carb. The Magnum...

I received this message from AMD a couple days ago..... Joel We have just recently decided to develop the quarter, trunk drops, outer wheel houses and a few other odds and ends for the rear of those Plymouths. However, we are pretty well tied up with our new Ford line of parts that we’re...

I used all the Ram [van] serpentine belt components and had a shop in Phoenix adapt the hoses.

Here is my original patina 67 Belvedere I got from New Mexico. Was all blue but p.o. started stripping the paint off the roof, decklid and hood. Was 273, now it has 5.2 efi magnum w/46re overdrive. Vintage Air and a Dakota Digital cruise control.

I recently purchased a 67 Belvedere from New Mexico with minimal rust. But what rust is there is in a bad place over the right rear wheelwell. I have called and emailed AMD and definitely want full panels.

pm sent.

I personaly spoke with Jamie in December and I am somewhere around 350/360 on his list for the 855. Yes they are rare as hens teeth right now because He just started shipping to customers. Hopefully there will be 360 more teeth out there before I put the Road Runner away before next winter.

I need a left tail light lens for a 1967 Belvedere. Belvedere only! Satellite and GTX are different. thx for any leads. Or buy one from a buddy and sell to me for a profit!!! Small profit please Joe

Is yours 5.9L or 360LA? Quote from another site. "Although the pre-Magnum ('71-'92) and Magnum versions of the 360/5.9 are both externally balanced, the two are balanced differently (the 360 Magnum uses lighter pistons) and each requires a uniquely balanced damper, flywheel, drive plate, or...

I'll add Johns auto body in Nicollet MN. He just finished a 70 Challenger RT/SE from New York http://www.johns-body-shop.com/default.aspx.

Thanks guys, I appreciate the input.

My friends Demon had a similer issue. He was told by someone to check the bulbs and see if any had the chrome/stainless bases. He found one chrome bulb and replaced it with a brass one and the problem was gone. I don't understand that one but he swears its true. Might be worth a look.

I'm thinkin... 70 :wave:

A friend of mine called me today to see if he should buy a complete rear that is reported to have been from a 68-69 Charger "Hemi" car. Can't prove that. I don't know Dana values. Whether or not it is from a Hemi car, What is a 3.54 B-Body Dana worth?