• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by charger_1968

  1. charger_1968

    FOR SALE 1966-70 B body rear seat bottom frame

    I have a 1966 -70 rear seat bottom frame, no broken spring, rust holes or any other defects . $200 located in So. Cal I can hold for anyone going to CPW fall fling in October
  2. charger_1968

    FOR SALE 1968-70 Charger belt line trim

    Complete set of OEM upper door and 1/4 trim, all in restorable shape, no D A sander grind marks or cracks. Both door pieces have a one ding each which should be straight forward repairs. I can supply more pictures for those interested. Located so California.. $400 plus shipping
  3. charger_1968

    FOR SALE 8 3/4 axle pawl lock and nut

    factory OEM MoPAR right side axle pawl and factory nut. i have 5 units to sell , 1 set each per order located in so Cal $20 shipped
  4. charger_1968

    SOLD OEM sure grip and 3.55 tags

    set of factory MoPAR tags 3.55 and suregrip good shape for original $30 shipped so cal parts
  5. charger_1968

    FOR SALE Accurate 2 1/4 "Exh. Tail pipes

    Accurate Exhaust 68-70 B Body 2 1/4" tail pipes for using tips. New never used... $300 Shipped from so cal
  6. charger_1968

    FOR SALE Big block OEM wire separators 1968 vintage

    Original MoPAR stored for almost 30 years from a 1968 383 4 barrel that had A/C, orange deflector from something i cant remember. I imagine they will work on other applications. located in sunny California where parts don't rust $125 shipped
  7. charger_1968

    SOLD ISKY rocker Arms BB

    Old school 1.5
  8. charger_1968

    SOLD ISKY rocker Arms BB

    Set of Big Block MoPAR old school Isky old reliable ductile iron rockers, with spring spacers , hold downs and shafts, Ready to run units , no galling, low use ..just look at the hold down adjusters. American made parts. located in southern California $425 shipped
  9. charger_1968

    FOR SALE TTI headers 440-200 for RB applications

    They are 2" primary with 3 1/2 inch collector
  10. charger_1968

    1967 Dodge Charger - Parts?

    I think those are power window stops that bolt to the window slide mount, ..
  11. charger_1968

    FOR SALE TTI headers 440-200 for RB applications

    Never ran TTI headers for RB A B E body cars, they were installed on a vehicle i bought but never fired, no dings scrapes etc. they are 2" primary tubes with 3 1/2 " collectors. Please go to TTI's website for all the details, some are : they will work with oem port location aftermarket angle...
  12. charger_1968

    SOLD TCI 10" torque converter model 142200

    It's been Sold thanks FABO
  13. charger_1968

    FOR SALE MoPAR RB MSD Pro Billet Distributor model 8546

    I have a MSD pro billet 440 distributor with cap and terminals and boots if you are able to modify your plug wires if needed, I also have some centrifugal weights that i believe came with it. i just tested it last night and it does spark the coil. its a low use unit located in sunny so...
Back
Top