• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by chargers777

  1. C

    Dreaded shift shaft seal in car tips

    No
  2. C

    Dreaded shift shaft seal in car tips

    I was able to pry it out with a small screwdriver . Looks like I need to learn to drop a valve body next time.
  3. C

    Dreaded shift shaft seal in car tips

    I have never dropped a valve body. To be honest a little intimidated by it.
  4. C

    Dreaded shift shaft seal in car tips

    I bought the tool that screws into the seal. Didn't work anyone have any tips or tricks? Transmission is in the car.
  5. C

    What rims are these and what center caps do they take

    It fits over the hub
  6. C

    What rims are these and what center caps do they take

    Found some that are 3.11. May have to try them. I can't find any 3 inches.
  7. C

    What rims are these and what center caps do they take

    I'll check again. I believe it was right on 3 inches
  8. C

    What rims are these and what center caps do they take

    C70 is 3.18 inches. Wonder if that would work on the 3 inch bore hole?
  9. C

    What rims are these and what center caps do they take

    Summit doesn't have any
  10. C

    What rims are these and what center caps do they take

    Center bore outside is 3 inches. Inside is 2.75inches making it hub centric for Mopar. What caps can I use? Can't find any push on that fit a 3 inch bore. What brand of rim are these? No markings on back of rim.disregard center caps in pic. They won't fit over the hub of the car.
  11. C

    76 Cordoba sunroof

    How many made? Is it a rare option?
  12. C

    318 rocker arm not moving

    Engine was stuck. I got it unstuck and running. Now number 1 exhaust rocker is not moving. Could it be a stuck valve or something else?
  13. C

    SOLD Magnum / Charger / 300 Interior Parts For Sale

    Pm sent
  14. C

    Edelbrock Brock dual bolt pattern on a thermoquad manifold

    Does it work without a adapter? What gasket should I use?
  15. C

    68 charger 440 conversion joint . Is it safe?

    Trying to swap center sections. Is a conversion joint safe with a mild 440?
See more
Back
Top