Recent content by chuckstirrr

Thanks for all the help guys, just found out that the set up is 1.5 ratio I will still check out the online info and learn all I can about the rocker geometry and any Modifications to the heads that may need to be done, Thanks again to all you guys, you have been a big help

Thanks for the info, I hate to be a dumb dumb , the number 1.6 does this number go up or down or both ways ? and I assume this changes the height of your rocker, if these rockers are 1.6 i'll pull the heads and go ahead have valve job and heads surfaced then I assume machine shop will get me the...

I got a chance to buy roller rockers , shafts , push rods, all from Scorpion performance for $300 for my 400 motor , I want to run the old purple shaft hyd cam 509 lift , I ran some thing like this years ago in my small block 340 (same cam) but instead of roller rockers it was the old 273...

Do you still have cam and lifter's are they for big block?

- - - Updated - - - Tried sending pic's there's a couple here one of them is up side down i'll try to resend and get them pointing the right direction

Welcome once he Starts driving the GTX he will be excited that he jumped over to mopar land, soon he will be saying it's Mopar or No Car ( lol)

Cool car now if I can get my 66 fury to lift the front wheels like your 65 I would be tickled pink.

Sweet ride

Nice looking mopar

Nice car.

Ill get down in the garage and get some pic's for you this coming weekend , Thanks - - - Updated - - - Yes plan on attending this summer, Thanks - - - Updated - - - Thank you - - - Updated - - - Thank you - - - Updated - - - Thank you - - - Updated - - - 400 727 not positive about gear...

I have had many A-body Dusters and Darts but about 3 months ago I was checking out Craigslist and came across this 66 Plymouth Sport Fury and to make a long story short I sold my Duster of 10 years and two days later we drove to Columbia Mo. and trailered the Fury back to Independence Mo. Car...