Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Is a 78 drivers side door a direct replacement for a 76?
I would like to replace mine which has some rust issues, and I have a bead on a 78 in good shape.
As always, any help is appreciated.
Thanks
Joe
I did it with power seats from another Cordoba. It was actually pretty easy once you get the wiring down. I actually used the electrical manual for a 77 Cordoba as the wiring diagrams were easier to understand.
Have you checked your timing chain? A loose chain can cause rough idle. I believe those vintage chain sprockets were coated with vinyl and overtime, they can break down and cause slippage throwing your timing out of wack. Just a thought. BTW, I have a 76 Cordoba with a 400 also.
I did this today as well as installed a new fuel filter (though the old filter showed no signs of crud in it). One or the other seemed to help, as she fired up again and has been running fine ever since.
Thanks all!
Another Sunday, another issue with the Cordoba!
She has been running fine all spring, starts right up, idles fine, drives fine. All of a sudden, the other day I start her up, she idles for about 5 minutes and then the engine shuts down. After that, it's very difficult to start again.
This...
I am planning on doing some brake work on my Cordoba and was wondering the best jack placement and Jack stand placement. I don't think using the bumper jack is a good idea.
Thanks for any advice.
Welcome!
I have a 76 Cordoba. There are lot's of similarities between the 75-79 Cordoba/Chargers/Magnum/300, so as said above. The 75-79 section is pretty active and has lots of helpful folks!
I need to replace my dual fuel/oil pressure gauge in my 76 cordoba, will a similar gauge from a 71 to 74 charger work as a replacement? there are a number of them on ebay and they aren't as pricey as the 76-79 versions that would be an exact match for mine.
Any help is appreciated.